View LO494UHR4-B0G-A3-MT_4551839.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

COTCO LUMINANT DEVICE (HUIZHOU) LTD.
SPECIFICATION FOR COTCO LED LAMP Document No: Model No : Rev. No: Date: SPE/LO494UHR4-B0G-A3-MT LO494UHR4-B0G-A3-MT 00 2007-12-17
Description: 100 Degree 4mm Oval LED Lamp in High Red Color with Tinted Diffused Lens and Stopper *This specification is only for MT Dice Material: AlGaInP
Confirmed By Customer: Date:
ATTENTION
OBSERVE PRECAUTIONS ELECTROSTATIC SENSITIVE DEVICES
Document No. Rev. No. Applications: Dimension Drawing
SPE/LO494UHR4-B0G-A3-MT 00
-
Full Color Display
Absolute Maximum Ratings at Ta = 25C Items
Forward Current*2 Peak Forward Current*1 Reverse Voltage Power Dissipation Operation Temperature Storage Temperature Lead Soldering Temperature Electrostatic Discharge Classification (MIL-STD-883E)
Symbol IF IFP VR PD Topr Tstg Tsol ESD
Absolute maximum Rating 50 200 5 130 -40 ~ + 95 -40 ~ +100
Unit mA mA V mW
C C
Max.260C for 3 sec Max.
(3mm from the base of the epoxy bulb)
Class II
*1 pulse width <=0.1msec duty <=1/10 *2 For long term performance the drive currents between 10mA and 30mA are recommended. Please contact COTCO sales representative for more information on recommended drive conditions.
Typical Electrical & Optical Characteristics ( Ta = 25C) ) Items Forward Voltage Reverse Current Dominant Wavelength Luminous Intensity Symbol VF IR D IV 21/2H-H 50% Power Angle 21/2V-V IF = 20mA --50 --deg Condition IF = 20mA VR = 5V IF = 20mA IF = 20mA IF = 20mA Min. ----618 770 --Typ. 2.1 --624 1200 105 Max. 2.6 100 630 ----Unit V A nm mcd deg
2/4
Format #: COTCO-D-074
REV.4
Document No. Rev. No. Standard bins for LO494UHR4-B0G-A3-MT (IF = 20mA):
Lamps are sorted to Luminous Intensity -IV & Dominant Wavelength -D bins shown. Orders for LO494UHR4-B0G-A3-MT may be filled with any or all bins contained as below. All Luminous Intensity -IV & Dominant Wavelength -D values shown and specified are at If=20mA.
SPE/LO494UHR4-B0G-A3-MT 00
* S+
V or above 2130mcd U Luminous Intensity (IV) 1520mcd T 1100mcd S 770mcd 618nm Dominant Wavelength (D) 630nm
* S+ indicates Luminous Intensity is at S bin or above.
Forward Voltage (VF) Rank Voltage V1 1.6-1.8 V V2 1.8-2.0 V V3 2.0-2.2 V V4 2.2-2.4 V V5 2.4-2.6 V
Important Notes:
1) All ranks will be included per delivery; rank ratio will be based on the Dices distribution. 2) Pb content <1000PPM. 3) Tolerance of measurement of luminous intensity is 15%. 4) Tolerance of measurement of dominant wavelength is 1nm. 5) Tolerance of measurement of Vf is 0.05 V. 6) Packaging methods are available for selection, Please refer to PACKAGING STANDARD. 7) Please refer to LED LAMP RELIABILITY TEST STANDARD for reliability test conditions. 8) Please refer to APPLICATION NOTES for Application.
3/4
Format #: COTCO-D-074
REV.4
Document No. Rev. No.
SPE/LO494UHR4-B0G-A3-MT 00
Graphs
If (mA) 100.0 80.0 60.0 40.0 20.0 0.0 1.8 Vf(V) Ir(uA) FIG.2 REVERSE CURRENT VS. REVERSE VOLTAGE. -60 Vr(V) -50 -40 -30 -20 -10 0.0 -10.0 -20.0 -30.0 -40.0 -50.0
2.0 2.2 2.4 2.6 2.8 FIG.1 FORWARD CURRENT VS.
FORWARD VOLTAGE.
5.0 4.0 3.0 2.0 1.0 0.0 0.0 If(mA) 20.0 40.0 60.0 80.0 100.0
Half Power WL=23nm Domi WL= 624nm 100% 75% 50% 25% 0% 400 WAVELENGTH. WL(nm) 900
500
600
700
800
FIG.3 RELATIVE LUMINOUS INTENSITY VS. FORWARD CURRENT.
FIG.4 RELATIVE LUMINOUS INTENSITY VS.
IF(mA) 100 80 60 40 20
50% Power Angle :
H-H : 105 V-V : 50 Ie(%)
H-H
V-V
0 100%
80%
60%
40%
0 0.0 20.0 40.0 60.0
Ta( C) 80.0 100.0
-90 -60 -30 0 30 60 90 20%
FIG.5 MAXIMUM FORWARD DC CURRENT VS AMBIENT TEMPERATURE (Tjmax=105 C)
0%
FIG.6 FAR FIELD PATTERN
1. Cathode PAD Area (0.18 x 0.18inch2) 2. Height above nominal seating plane in inches(0.3inch)
Items Prepared by Checked by Approved by FCN#
Signatures
LiuYin MaJF David
Date
2007-12-17 2007-12-17 2007-12-17 Rev. No Date
Revision History
Change Description
FCN200703
Data is subject to change without prior notice; Copyright@2002 Cotco International Ltd.
4/4
Format #: COTCO-D-074
REV.4

▲Up To Search▲

Price & Availability of LO494UHR4-B0G-A3-MT

	To Download LO494UHR4-B0G-A3-MT Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .